+
  • 碱性酚醛树脂.jpg

Product Description

Alkaline phenolic resin and matching hardener

The alkaline phenolic self-curing resin process, also known as the α-set method, uses a brownish-red liquid resin that exhibits the following characteristics:

● The resin is nitrogen-free, and the curing agent is free of sulfur and phosphorus, thereby preventing defects such as sulfur and phosphorus enrichment on the casting surface, microstructural degradation, and nitrogen porosity.

● Excellent compatibility with raw sands. Alkaline phenolic resins are suitable not only for quartz sand, zircon sand, and South African iron ore sand with low acid consumption values, but also for sea sand, iron ore sand, and forsterite sand, which have higher acid consumption values.

● This hardening system exhibits thermoplasticity and a secondary hardening process at elevated temperatures, thereby significantly reducing cracking and burring defects in cast steel and ductile iron components.

● Low free formaldehyde content, only 0.2%; the curing agent used is odorless, ensuring good occupational health and safety conditions.

● Alkaline phenolic resin self-setting sand exhibits low gas evolution and excellent collapsibility, thereby reducing sand-cleaning labor hours and improving work efficiency.

● Excellent curing performance with adjustable mold-release time; when used in combination with three grades of curing agent, it can meet the curing requirements for mold (core) sand across all seasons throughout the year.

● In aluminum–copper alloy castings, porosity is significantly reduced; gas tightness is improved; the core disintegration performance is excellent; dimensional accuracy is high; and the yield of finished parts is substantially increased.

 

Scope of Application

Various alloy steels, carbon steels, and high-manganese steels

 

Performance Metrics

Model Appearance Viscosity (25°C) mPa·s Density (25°C) g/cm³ Free phenol % ≤ Free formaldehyde % ≤ Tensile Strength (24 h) Compressive Strength (24 h)
Alkaline phenolic resin Brownish-red viscous liquid 70-90 1.2–1.3 0.5 0.2 1.2-1.8Mpa 3.5-4.5Mpa

 

Main Technical Performance Indicators of Alkaline Phenolic Curing Agent

Model Appearance Ester content (%) Density (g/cm³) Demolding time (20°C, min)
YG-G-01 Low-viscosity liquid ≥95 1.1–1.2 10
YG-G-02 Low-viscosity liquid ≥95 1.1–1.2 20
YG-G-03 Low-viscosity liquid ≥95 1.1–1.2 120
YG-G-04 Low-viscosity liquid ≥95 1.1–1.2 240

 

User Guide

● Mixing ratio: resin 1.2–2.0% (based on sand weight), curing agent 20–25% (based on resin weight).

● Sand-mixing process: First, the sand is mixed with the curing agent, followed by the addition of resin. The typical sand-mixing time is 5 to 60 seconds.

●For sand-mixing equipment and processes, it is recommended to use high-efficiency resin-bonded sand mixers. When the batch size is small, intermittent bowl-type resin-bonded sand mixers or dual-agitator intensive-rolling mixers are preferred; when the batch size is large, blade-type continuous sand mixers are recommended.

Keywords:

Alkaline Phenolic Resin and Corresponding Curing Agent

Previous:

Next:

Application Cases

图片1(1770806326706).jpg
图片1(1770806326706).jpg

Alkaline phenolic resin

图片2(1770806618161).jpg
图片2(1770806618161).jpg

Alkaline phenolic resin

图片4.jpg
图片4.jpg

Alkaline phenolic resin

图片3.jpg
图片3.jpg

Alkaline phenolic resin

3acf13972dc59c6d05a8d96d3837e5b.png
3acf13972dc59c6d05a8d96d3837e5b.png

Alkaline phenolic resin

Online Inquiry

If you have any suggestions, please leave us a message or send an email, and we will respond to you within one business day of receiving your email.

Submit