Product Categories
Product Search
Please enter a keyword.
- All
- Product Management
- News and Information
- Introduction Content
- Enterprise outlets
- Frequently Asked Questions
- Corporate Video
- Corporate Brochure
Phenol-urea-alkane Self-Curing Resin Series
Product Description
Series of Phenolic Urethane Self-Curing Resins
Characteristics
Phenol-urea-alkyd self-curing resins comprise three components: the first is phenolic resin, the second is polyisocyanate, and the third is a catalyst.
● Rapid and uniform curing, with enhanced demolding performance and high-temperature strength;
●The ratio of usable time to demolding time can exceed 75%;
● Contains no S or P, with low gas evolution, which can reduce porosity defects;
● Excellent flowability, reducing crack defects;
● Wide adaptability; capable of producing cast steel and non-ferrous metals.
User Guide
● When using a batch-type sand mixer, prior to preparing the mix, first add an appropriate amount of catalyst to Component 1 and mix thoroughly. After mixing with the sand for 1 minute, add Component 2 and mix for another 2 minutes; once the mixture is uniform, discharge the sand and proceed with core making. When using a continuous sand mixer, it is recommended to add an appropriate amount of catalyst together with Component 1 resin directly to the sand, followed by the addition of Component 2 resin. Immediately after discharging the sand, proceed with core making or mold shaping.
● The typical mixing ratio of Component 1 resin to Component 2 resin is (50–55%):(50–45%). The catalyst should be added at 0.5–3% of the weight of Component 1 and pre-dissolved in Component 1 before thorough mixing.
Resin Technical Specifications
| Grade Specifications | Density (20°C) g/cm³ | Viscosity (20°C) ≤ mPa·s | Free formaldehyde % ≤ | Shelf life (years) | Scope of Application |
| YG-RF001 | January 6–12 | 220 | <0.5 | 6 months | Cast iron, cast steel |
| YG-RF002 | January 6–12 | 220 | 0 | 6 months | Cast iron, cast steel |
| YG-RF003 | 1.08–1.18 | 50 | One | 6 months | Cast iron, cast steel |
| YG-RF004 | 0.92–1.02 | 100 | - | 6 months | Nonferrous metals |
| YG-RF005 | 1.05–1.15 | 50 | - | 6 months | Nonferrous metals |
Phenol-urea-formaldehyde resins are widely used for molding ferrous and nonferrous metals.
Keywords:
Phenol-urea-alkane Self-Curing Resin Series
Previous:
Next:
Application Cases
Steel Casting (Carbon Steel, High-Alloy Steel, Stainless Steel, etc.) Molding Process – Upper Mold Box
Lower mold for the pattern-making process of cast steel (carbon steel, high-alloy steel, stainless steel, etc.)
Core-making process for cast steel (carbon steel, high-alloy steel, stainless steel, etc.)
Molding and Mold Assembly for Steel Casting (Carbon Steel, High-Alloy Steel, Stainless Steel, etc.)
Castings
Aluminum Casting Molding Process
Online Inquiry