Product Categories
Product Search
Please enter a keyword.
- All
- Product Management
- News and Information
- Introduction Content
- Enterprise outlets
- Frequently Asked Questions
- Corporate Video
- Corporate Brochure
Release agent
Category:
Product Description
A general-purpose mold release agent specially formulated for casting, suitable for sand casting, die casting, coated-sand molding, and hot-box core-making processes. It effectively addresses issues such as sticking, surface tearing, carbon deposition, and surface defects, thereby improving casting yield and production efficiency.
I. Product Overview
This casting release agent features a high-temperature-stable film-forming formulation that delivers rapid film formation, uniform adhesion, and smooth demolding. A single spray application enables multiple demolding cycles, significantly reducing consumable usage and labor time. The product is non-corrosive, does not contaminate castings, and has no adverse impact on subsequent coating, welding, or machining operations, making it a standard, essential consumable for stable mass production in foundry shops.
II. Core Performance Advantages
1. High-temperature resistance
Withstands high mold temperatures without decomposing, coking, or carbon deposition, thereby protecting the mold and extending its service life.
2. Easy to peel off and non-stick mold
A dense, tight release film forms rapidly, resulting in low demolding resistance and producing castings that are intact, free of scratches, sand sticking, and corner defects.
3. Long-lasting material savings
One application—spraying or brushing—provides multiple consecutive release cycles, with a high dilution ratio and low consumption, resulting in lower overall costs.
4. Environmental Protection
Low-odor and free of harmful volatile emissions, it is environmentally and human-friendly and complies with workshop production standards.
5. Mold-friendly
It is non-corrosive to metal, wood, and plastic molds, leaves no residue, is easy to clean, and does not affect mold accuracy or markings.
6. Strong adaptability
Suitable for all types of sand-mold and alloy casting, delivering stable and reliable performance even for complex cavities, deep cavities, and thin-walled parts.
III. Technical Parameters,
1. Appearance: Silver-gray liquid
2. pH: 7.0–9.0
3. Stability: No layering, no sedimentation
4. Applicable molds: metal molds, wooden molds, plastic molds, and core boxes.
IV. Scope of Application
1. Sand Casting: Resin-bonded sand, sodium silicate sand, clay-bonded sand, coated sand, hot-box core making, and shell-mold casting
2. Die Casting Process: Die casting of aluminum alloys, zinc alloys, magnesium alloys, and copper alloys
3. Applicable workpieces: automotive parts, agricultural machinery castings, hardware accessories, mechanical housings, pipe fittings, and complex sand cores.
4. Applicable scenarios: the entire process flow, including pattern making, core making, mold assembly, pouring, cooling, and demolding.
V. Instructions for Use
1. Stir thoroughly before use;
2. Dilute according to process requirements; it is recommended to conduct a small-scale trial first to determine the most suitable dilution ratio.
3. Apply the coating uniformly to the mold cavity surface using spray, brush, or wipe application.
4. After natural air drying or mild heating drying, the mold can be closed and casting can proceed.
5. Reapply spray as needed based on demolding performance to extend the service life of each coating application.
VI. Product Value
1. Improved yield: reduced sticking, tearing, porosity, and sand holes, resulting in higher surface finish of castings.
2. Improve efficiency and reduce costs: minimize mold repair, mold cleaning, and rework, and increase cycle time and production capacity.
3. Mold protection: reduces thermal shock and corrosion, extending mold life
4. Green Production: No residual waste liquid, easy to dispose of, and compliant with environmental protection requirements.
VII. Packaging and Storage
1. Packaging specifications: 20 L/drum, 200 L/drum (customizable)
2. Storage Conditions: Store in a cool, dry place in a sealed container; avoid direct sunlight and high temperatures.
3. Shelf life: 12 months
VIII. Customization and Services
1. Customizable by formulation: water-based/oil-based, silicone-free, highly dilutable
2. Provide on-site commissioning, mix proportion optimization, and technical support.
3. OEM/ODM services, bulk supply, and reliable delivery schedules
Keywords:
Release agent
Previous:
Next:
Application Cases
Online Inquiry