Product Categories
Product Search
Please enter a keyword.
- All
- Product Management
- News and Information
- Introduction Content
- Enterprise outlets
- Frequently Asked Questions
- Corporate Video
- Corporate Brochure
YG-YZ Series Straight-Shape Heating and Insulating Risers
Product Description
YG-YZ Series Straight-Shape Heating and Insulating Risers
Product Overview
The heating and insulation risers in this series are primarily composed of lightweight refractory materials and heating agents, and are manufactured by vacuum-assisted molding of a water-based slurry followed by baking. They exhibit excellent permeability and low gas evolution, ensuring no adverse effects on the castings; their high refractoriness also promotes clean surfaces on returned scrap.
Suitable for medium- to large-sized ferrous and nonferrous castings, the products are available in straight-barrel, neck-reduced, and sloped-neck configurations, and in both open (uncovered) and covered (with a lid) styles. To ensure effective feeding and shrinkage compensation from the open riser, it must be used in conjunction with a heat-generating covering agent.
Common Models
Riser specifications |
Effective modulus |
Geometric modulus |
Volume |
Dimensions of each part |
||
You |
two |
H |
||||
centimeter |
centimeter |
dcm3 |
mm |
mm |
mm |
|
YG-YZ 40*75 |
0.79 |
94 |
66 |
42 |
75 |
|
YG-YZ 50*75 |
0.94 |
147 |
78 |
52 |
75 |
|
YG-YZ 60*75 |
1.07 |
212 |
90 |
62 |
75 |
|
YG-YZ 70*100 |
1.30 |
385 |
103 |
73 |
100 |
|
YG-YZ 80*150 |
1.58 |
754 |
115 |
83 |
150 |
|
YG-YZ 90*150 |
1.73 |
954 |
127 |
93 |
150 |
|
YG-YZ 100*150 |
1.88 |
1178 |
139 |
103 |
150 |
|
YG-YZ 125*150 |
2.21 |
1841 |
166 |
128 |
150 |
|
YG-YZ 150*150 |
3.58 |
2.50 |
2649 |
195 |
150 |
150 |
YG-YZ 180*180 |
4.29 |
3.00 |
4578 |
230 |
180 |
180 |
YG-YZ 200*200 |
4.77 |
3.33 |
6280 |
250 |
200 |
200 |
YG-YZ 225*225 |
5.36 |
3.75 |
8942 |
275 |
225 |
225 |
YG-YZ 250*250 |
6.04 |
4.17 |
12266 |
305 |
250 |
250 |
YG-YZ 275*275 |
6.65 |
4.58 |
16326 |
330 |
275 |
275 |
YG-YZ 300*300 |
7.25 |
5.00 |
21195 |
360 |
300 |
300 |
YG-YZ 325*163 |
5.90 |
4.07 |
13515 |
385 |
325 |
163 |
7.85 |
5.42 |
26948 |
385 |
325 |
325 |
|
YG-YZ 325*200 |
7.47 |
16583 |
385 |
325 |
200 |
|
YG-YZ 350*175 |
6.13 |
4.38 |
16828 |
415 |
350 |
175 |
8.17 |
5.83 |
33657 |
415 |
350 |
350 |
|
YG-YZ 350*200 |
8.08 |
19233 |
415 |
350 |
200 |
|
YG-YZ 375*188 |
6.57 |
4.69 |
20753 |
440 |
375 |
188 |
8.75 |
6.25 |
41396 |
440 |
375 |
375 |
|
YG-YZ 400*200 |
7.00 |
5.00 |
25120 |
465 |
400 |
200 |
9.33 |
6.67 |
50240 |
465 |
400 |
400 |
|
YG-YZ 450*150 |
6.21 |
4.50 |
23844 |
515 |
450 |
150 |
8.87 |
6.43 |
47689 |
515 |
450 |
300 |
|
10.35 |
7.50 |
71533 |
515 |
450 |
450 |
|
YG-YZ 450*200 |
7.
31 |
31793 |
515 |
450 |
200 |
|
YG-YZ 500*167 |
6.71 |
5.01 |
32774 |
565 |
500 |
167 |
9.58 |
7.15 |
65548 |
565 |
500 |
334 |
|
11.17 |
8.33 |
98125 |
565 |
500 |
500 |
|
YG-YZ 500*200 |
7.45 |
39250 |
565 |
500 |
200 |
|
YG-YZ 550*184 |
7.28 |
5.51 |
43693 |
620 |
550 |
184 |
10.39 |
7.87 |
87386 |
620 |
550 |
368 |
|
12.10 |
9.17 |
130604 |
620 |
550 |
550 |
|
YG-YZ 550*200 |
7.64 |
47493 |
620 |
550 |
200 |
|
7.80 |
56520 |
670 |
600 |
200 |
||
YG-YZ 600*200 |
7.80 |
6.00 |
56520 |
670 |
600 |
200 |
11.14 |
8.57 |
113040 |
670 |
600 |
400 |
|
13.00 |
10.00 |
169560 |
670 |
600 |
600 |
|
YG-YZ 650*200 |
8.05 |
66333 |
720 |
650 |
200 |
|
YG-YZ 700*200 |
8.27 |
76930 |
780 |
700 |
200 |
|
YG-YZ 800*200 |
8.67 |
100480 |
880 |
800 |
200 |
|
YG-YZ 850*200 |
8.84 |
113433 |
930 |
850 |
200 |
|
Note: Non-standard product models can be manufactured according to customer requirements. |
||||||
How to Use
● According to cast Determine the shrinkage compensation locations based on the part’s shape, size, and material. , Select the appropriate riser specification based on the requirements of each location. 。
● Avoid damaging the riser during embedded molding.
● When designing a top riser, a sand-bridge transition zone must be provided between the riser and the main body of the casting.
● Select a hidden riser ( Riser diameter 400 Less than a millimeter ) A vent hole shall be provided at the top.
● When using a clear riser, immediately cover the molten metal with a measured amount of exothermic material upon completion of pouring. , The pouring riser cannot be tapped at this time. 。
Packaging and Storage
● Six-sided sealing using heat-shrink film.
● The riser shall be stored in a cool, dry place, away from open flames.
● Do not remove the packaging film until just before use to prevent moisture absorption.
Packaging and Storage
● Open flames must not be used for direct heating, nor should alcohol-based coatings be applied to the riser.
● Comply with all provisions in the safety manual.
Keywords:
YG-YZ Series Straight-Shape Heating and Insulating Risers
Previous:
Application Cases
Heating and Insulating Riser
Online Inquiry
