Product Description

IIA Mold-type heating and insulation riser

Product Overview

IIA The shaped heat-preserving riser is produced by vacuum adsorption molding of a water-based slurry followed by drying; this series is further divided into concealed risers and exposed risers. It features low density, excellent toughness, and good permeability, making it suitable for a variety of molding processes in the production of small to medium-sized cast iron and cast steel parts. Its modulus range is 1.7–3.73 centimeters. Due to the product’s excellent toughness, it is particularly well suited for embedded molding.

Common Models

How to Use

● When selecting specifications, the modulus and volume of the riser must be taken into account.

● When designing a top riser, a gap must be left between the riser and the main body of the casting. 6-15 A transition zone of millimeters, or use a sacrificial slice as a barrier.

● When using a hidden riser in pattern making, vent holes must be provided at its top.

● When using a bright riser, a certain amount of exothermic material must be applied after the mold is completely filled.

Packaging and Storage

● Uses paper trays with heat-shrink film and six-sided sealing.

● Risers shall be stored in a cool, dry place, away from open flames.

● Do not remove the heat-shrink packaging until just before use to prevent moisture absorption.

Precautions

● Open flames must not be used for direct heating, nor should alcohol-based coatings be applied to the riser.

● Follow the safety instructions. (SDS) the various provisions therein.

Keywords:

Type IIA Heating and Insulating Riser

Next:

Application Cases

IIA型发热保温冒口在铁路件上的应用(道岔).png
IIA型发热保温冒口在铁路件上的应用(道岔)1.png
IIA型发热保温冒口在铁路件上的应用(道岔).png
IIA型发热保温冒口在铁路件上的应用(道岔)1.png

Application of Type IIA Heating and Insulating Riser in Railway Components (Turnouts)

Online Inquiry

If you have any suggestions, please leave us a message or send an email, and we will respond to you within one business day of receiving your email.

Submit