Product Description

YG-XJ Series Slanted-Neck Heating and Insulating Riser

Product Overview

 

The heating and insulation risers in this series are primarily composed of lightweight refractory materials and heating agents, and are manufactured by vacuum-assisted molding of a water-based slurry followed by baking. They exhibit excellent permeability and low gas evolution, ensuring no adverse effects on the castings; their high refractoriness also promotes clean surfaces on returned scrap.

Suitable for medium- to large-sized ferrous and nonferrous castings, the products are available in straight-barrel, neck-reduced, and sloped-neck configurations, and in both open (uncovered) and covered (with a lid) styles. To ensure effective feeding and shrinkage compensation from the open riser, it must be used in conjunction with a heat-generating covering agent.

Common Models

 

Riser specifications

Effective modulus

Geometric modulus

Dimensions of each part

Volume

D

H

h

N

Tmin

Tmax

centimeter

centimeter

mm

mm

mm

mm

dcm3

YG-XJ 150

4.2

 

152.4

304.8

230.1

76.2

12.7

17.5

5101

YG-XJ 180

4.67

3.46

177.8

304.8

217.7

88.9

12.7

17.5

6675

YG-XJ 200

5.17

3.83

203.2

304.8

204.7

101.6

12.7

17.5

8588

YG-XJ 225

5.6

4.15

228.6

304.8

192

114.3

19.1

23.9

10663

YG-XJ 250

6.02

4.46

254

304.8

224.5

101.6

19.1

23.9

12787

YG-XJ 300

6.8

5.04

304.8

304.8

153.9

121.9

19.1

23.9

18234

YG-XJ 350

7.43

5.5

355.6

304.8

128.5

142.2

19.1

23.9

24002

Note: Non-standard product models can be manufactured according to customer requirements.

 

How to Use

● According to cast Determine the shrinkage compensation locations based on the part’s shape, size, and material. , Select the appropriate riser specification based on the requirements of each location. 。

● Avoid damaging the riser during embedded molding.

● When designing a top riser, a sand-bridge transition zone must be provided between the riser and the main body of the casting.

● Select a hidden riser. ( Riser diameter 400  Less than a millimeter ) A vent hole shall be provided at the top.

● When using a clear riser, immediately cover the molten metal with a measured amount of exothermic material upon completion of pouring. , The pouring riser cannot be tapped at this time. 。

Packaging and Storage

● Six-sided sealing using heat-shrink film.

● The riser shall be stored in a cool, dry place, away from open flames.

● Do not remove the packaging film until just before use to prevent moisture absorption.

Packaging and Storage

● Open flames must not be used for direct heating, nor should alcohol-based coatings be applied to the vent.

● Comply with all provisions in the safety manual.

Keywords:

YG-XJ Series Slanted-Neck Heating and Insulating Riser

Application Cases

斜颈冒口在耐磨件上的应用.png
斜颈冒口在耐磨件上的应用1.png
斜颈冒口在耐磨件上的应用2.bmp
斜颈冒口在耐磨件上的应用.png
斜颈冒口在耐磨件上的应用1.png
斜颈冒口在耐磨件上的应用2.bmp

Application of Oblique Neck Risers in Wear-Resistant Components

Online Inquiry

If you have any suggestions, please leave us a message or send an email, and we will respond to you within one business day of receiving your email.

Submit