Product Description

YG-TY Series Round-Waist Heating and Insulating Risers

Product Overview

 

The heating and heat-preserving risers in this series are primarily composed of lightweight refractory materials and heating agents, and are manufactured by vacuum-assisted molding of a water-based slurry followed by baking. They exhibit excellent permeability and low gas evolution, ensuring no adverse effects on the castings; their high refractoriness also promotes clean surfaces on returned scrap.

Suitable for medium- to large-sized ferrous and nonferrous castings, the products are available in straight-barrel, neck-reduced, and sloped-neck configurations, and in both open (uncovered) and covered (with a lid) styles. To ensure effective feeding and shrinkage compensation from the open riser, it must be used in conjunction with a heat-generating covering agent.

Common Models

Specifications

Modulus cm

Volume in ml

Steel liquid in the ladle
Kilogram

Size

a (mm)

b (mm)

T (mm)

H (mm)

TY80/160/150

2.00 

1700

13.26 

80

160

20

150

TY90/140/140

1.98 

1290

10.06 

90

135

17

140

TY100/150/150

2.23 

1900

14.82 

100

150

20

150

TY100/200/200

2.60 

3500

27.30 

100

200

20

200

TY120/180/180

2.63 

3331

25.98 

120

180

20

180

TY120/180/200

2.72 

3700

28.86 

120

180

20

200

TY120/240/200

2.98 

5141

40.10 

120

240

22

200

TY140/210/200

3.02 

5000

39.00 

140

210

22

200

TY140/280/200

3.28 

6997

54.58 

140

280

24

200

TY160/240/200

3.31 

6600

51.48 

160

240

22

200

TY160/240/240

3.45 

7895

61.58 

160

240

22

240

TY160/320/200

4.02 

9139

71.28 

160

320

26

200

TY180/270/200

4.08 

8300

64.74 

180

270

22

200

TY180/270/270

4.25 

11241

87.68 

180

270

22

270

TY180/360/200

4.48 

11567

90.22 

180

360

28

200

TY200/300/200

3.82 

10300

80.34 

200

300

24

200

TY200/300/300

4.78 

15420

120.28 

200

300

24

300

TY200/400/200

4.80 

14280

111.38 

200

400

30

200

TY220/330/200

4.12 

12400

96.72 

220

330

26

200

TY220/330/330

4.82 

20524

160.09 

220

330

28

330

TY240/360/360

5.27 

26646

207.84 

240

360

30

360

TY250/375/200

4.42 

16000

124.80 

250

375

28

200

TY270/405/200

4.62 

18700

145.86 

270

405

30

200

 

 

How to Use

● According to cast Determine the shrinkage compensation locations based on the part’s shape, size, and material. , Select the appropriate riser specification based on the requirements of each location. 。

● Avoid damaging the riser during embedded molding.

● When designing a top riser, a sand-bridge transition zone must be provided between the riser and the main body of the casting.

● Select a hidden riser ( Riser diameter 400  Less than a millimeter ) A vent hole shall be provided at the top.

● When using a bright riser, immediately cover the molten metal with a measured amount of exothermic material upon completion of pouring. , The pouring riser cannot be tapped at this time. 。

Packaging and Storage

● Six-sided sealing using heat-shrink film.

● The riser shall be stored in a cool, dry place, away from open flames.

● Do not remove the packaging film until just before use to prevent moisture absorption.

Packaging and Storage

● Open flames must not be used for direct heating, nor should alcohol-based coatings be applied to the vent.

● Comply with all provisions in the safety manual.

Keywords:

YG-TY Series Round-Waist Heating and Insulating Risers

Application Cases

腰圆冒口在履带板上的应用.png
腰圆冒口在履带板上的应用.png

Application of Waist-Round Risers on Track Shoes

腰圆冒口应用在铸钢阀体.png
腰圆冒口应用在铸钢阀体1.png
腰圆1.png
腰圆冒口应用在铸钢阀体.png
腰圆冒口应用在铸钢阀体1.png
腰圆1.png

Round risers are used in cast steel valve bodies.

Online Inquiry

If you have any suggestions, please leave us a message or send an email, and we will respond to you within one business day of receiving your email.

Submit